PDA

View Full Version : r6 gearing



carter41
02-10-2003, 04:08 PM
Does anyone know which sprockets i should run and what tracks I should run them? this is my first 600 and I have limited knowledge about it. Thanks Carter

carter41
02-10-2003, 04:08 PM
Does anyone know which sprockets i should run and what tracks I should run them? this is my first 600 and I have limited knowledge about it. Thanks Carter

Jesse Davis
02-10-2003, 05:42 PM
17/53 at oak hill
17/49 at TWS
17/50 at cresson and hallet

this is what i used. your results may vary. i use sprocket specialists, and i can set you up with a set cheap. dont forget to saftey wire the countershaft sprocket nut...to the sprocket, they like to back off on R6's, leaving you stranded.

JD

Jesse Davis
02-10-2003, 05:42 PM
17/53 at oak hill
17/49 at TWS
17/50 at cresson and hallet

this is what i used. your results may vary. i use sprocket specialists, and i can set you up with a set cheap. dont forget to saftey wire the countershaft sprocket nut...to the sprocket, they like to back off on R6's, leaving you stranded.

JD

carter41
02-13-2003, 04:23 PM
thanks Jesse, does anybody have any other suggestions?

carter41
02-13-2003, 04:23 PM
thanks Jesse, does anybody have any other suggestions?

Scotty
02-14-2003, 08:05 AM
16-50 OAKHILL
16-49 HALLETT
16-49 MSR
16-48 TWS
Stock gearing is 16-48.
Gearing will differ due to track conditions wind etc.If you have any problems at the track caome find me just ask sombody where FISH is.Jesses suggestion is close also.

Scotty
02-14-2003, 08:05 AM
16-50 OAKHILL
16-49 HALLETT
16-49 MSR
16-48 TWS
Stock gearing is 16-48.
Gearing will differ due to track conditions wind etc.If you have any problems at the track caome find me just ask sombody where FISH is.Jesses suggestion is close also.